Leading technology
 
care service
 
finishing
 
faq
 
Get A Quote
 
 

Contact us

  • Egood Operable Partition

  • Tel:+86-757-85632132
  • Fax:+86-757-85623229
  • Email:Luke4space@chinajls.com
  • Addr:No. 2, 2 heng Road, Shirong Industry Zone, Hecun, Lishui Town, Naihai District , Foshan , Guangdong China (Mainland)
  • More

Track systems for Egood operable walls

Updated:2015-06-19 07:25:05
 

A quality track system assures your operable wall will move easily for years to come and enhance fast panel set-up and take-down.All Egood tracks are rigorously tested to last aluminum of 160 Km(100 miles), approximately ten years of use.Job requirements vary,which is why egood offers a selection of steel and aluminum tracks to meet you needs,Our patented designs are the most imitated in the industry.Our aluminum tracks are of clear anodized extruded architectural grade 6063-T6 alloy. The list of aluminum benefits is long.Among these are quiet carrier operations,consistent shape for end-to-end alignment,unitized design for incorporating header panels and alignment pins,corrosion-resistance,and enable anodizing for a smooth,hard running surface needed for proper carrier movement.


Type 60  Track System:For single or paired panel weight up to 250 Kg.one 4-wheeled carrier is provided per panel.Each wheel consists of molded polymer tires on hardened steel bearing.Resilient mounted body for quite operation and load distribution.Special for center stacking option,usual dimension from the ceiling to structure is 200mm.

Type 65 Track System: For Omni-Directional panel weight up to 225kg.Two carrier are provided per panel.Each carrier has two horizontal counter-rotating wheels that roll(not slide)in the track.Each wheel has precision ground bearings,encased with POM for quiet operation.Carriers easily negotiate square or angled corners without switches.Usual dimension from the ceiling to the structure is 200mm.

 

Type 80 Track System:

For Omni-Directional panel weight up to 380kg,Two carriers are provided per panel.Each carrier has two horizontal counter-rotating wheels that roll(not slide) in the track.Each wheel has precision ground bearing,encased with POM for quiet operation.Carriers easily negotiate square or angled corners without switches.Minimum dimension from the ceiling to the structure is 200mm.

 

Type 100 Track System:

For Omni-Directional panels weighting up to 650kg. Two carriers are provided per panel.Each carrier has two horizontal counter-rotating wheels that roll(not slide)in the track.Each wheel has precision ground bearing,encased with POM,steel banded and reinforced.Carriers easily negotiate square or angled corners without switches,usually dimension from the ceiling to the structure is 250mm.

 

 

100 series ultrahigh aluminum heavy duty  track system

are used when the partition height or weight limit Exceed that recommended for the normal aluminum system.Maximum height can reach to 12.5 Meter with panel weight up to 900Kg.Each carriers can be programmed for self-directing and sorting.All junction tracks are factory assembled and welded.Minimum dimension from the ceiling to the structure is 300mm.

 

 

100 series ultrahigh  steel heavy duty track system

are used when the partition height or weight limit Exceed that recommended for the normal Aluminum System Maximum height can reach to 17 meter with panel weight up to 1300KG.Each carrier has Four Steel Wheels with precision Ground radial bearings.Bearings are inserted into a steel tire.The steel tire Rim fully captures the bearing.Carriers can be programmed for self-directing and sorting.The track is of formed black painted high strength steel.The track is of clear anodized aluminum.All junction tracks are factory assembled and welded.Minimum dimension from the ceiling to the structure is 350mm.

 

 

 

 

 

 
 
Live Chat by comm100